Hyperspectral imaging with a liquid crystal polarization interferometer

Citation

Alex Hegyi and Joerg Martini, “Hyperspectral imaging with a liquid crystal polarization interferometer,” Opt. Express 23, 28742-28754 (2015).

Abstract

A novel hyperspectral imaging system has been developed that takes advantage of the tunable path delay between orthogonal polarization states of a liquid crystal variable retarder. The liquid crystal is placed in the optical path of an imaging system and the path delay between the polarization states is varied, causing an interferogram to be generated simultaneously at each pixel. A data set consisting of a series of images is recorded while varying the path delay; Fourier transforming the data set with respect to the path delay yields the hyperspectral data-cube. The concept is demonstrated with a prototype imager consisting of a liquid crystal variable retarder integrated into a commercial 640×480 pixel CMOS camera. The prototype can acquire a full hyperspectral data-cube in 0.4 s, and is sensitive to light over a 400 nm to 1100 nm range with a dispersion-dependent spectral resolution of 450 cm-1 to 660 cm-1. Similar to Fourier transform spectroscopy, the imager is spatially and spectrally multiplexed and therefore achieves high optical throughput. Additionally, the common-path nature of the polarization interferometer yields a vibration-insensitive device. Our concept allows for the spectral resolution, imaging speed, and spatial resolution to be traded off in software to optimally address a given application. The simplicity, compactness, potential low cost, and software adaptability of the device may enable a disruptive class of hyperspectral imaging systems with a broad range of applications.


Read more from SRI